Home > Products > Auto Range Multimeter > CAT IV Digital Multimeter With Lan Wire Test Function VA43

CAT IV Digital Multimeter With Lan Wire Test Function VA43


The CAT IV digital multimeter for Lan wire test can be also used for phone test and cable check. This CAT IV digital multimeter for Lan wire test is ideal for use in the fields, workshop, school, hobby and home applications.

Send Inquiry


    Product Features:

    • DATA HOLD mode
    • Manual ranging and Autorange mode
    • Battery Saver
    • AC and DC Voltage measurement
    • Current measurement
    • Resistance Diode Continue measurement
    • CABLE TESTER Function
    • RJ45 TEST
    • NCV TEST
    • General specifications
    • Environment conditions: 600V CAT Ⅲ
    • Pollution degree: 2
    • Altitude < 2000m
    • Operating temperature: 0~40℃, 32℉~122℉(<80% RH, <10℃ non-condensing)
    • Storage temperature: -10~60 ℃, 14℉~140℉(<70% RH, battery removed)
    • Temperature Coefficient: 0.1×(specified accuracy) / ℃ (<18℃ or >28℃)
    • MAX. Voltage between terminals and earth ground: 600V AC rms or 600V DC.
    • Fuse Protection: A and mA: F 0.2A/600V∅5×20;
    • Sample Rate: 3 times/sec for digital data.
    • Display: 3 1/2 digits LCD display. Automatic indication of functions and symbols.
    • Range selection: automatic and manual.
    • Over Range indication: LCD will display “OL”.
    • Low battery indication: The “” is displayed when the battery is under the proper operation range.
    • Polarity indication: “-” displayed automatically.
    • Power source: 9V
    • Battery type: 6F22.
    • Dimensions: 190(L)×90(W)×40(H) mm.
    • Weight: 500g. Approx. (battery included).

    Product Parameters:

    DC Voltage 200mV/2V/20V/200V/600V ±(0.7%+4)
    AC Voltage 200mV/2V/20V/200V/600V ±(1%+6)
    DC Current 200μA/2mA/20mA/200mA ±(2%+10)
    AC Current 200μA/2mA/20mA/200mA ±(3%+10)
    Resistance 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ ±(1%+5)
    Logic Frequency
    Linear Frequency
    Display Discounts 1999
    Auto/Manual Range
    NCV Function
    RMS Measurement
    Max measurement
    Relative measurement
    Data hold
    Back light
    Diode test
    Continuity test
    LAN wire test
    Phone test
    Cable check
    Electric field test
    USB port connect to PC
    Low power indication
    Auto power off
    Low battery detect
    Power 6F22(9V)X1

    Application and After-Sales Service:
    With Functions of cable test,tone test, NCV test, RJ45 test, Voltage measurement, Current measurement, Resistance measurement, Diode and continuity Test, Manual and Auto Range, this digital multimeter is ideal for use in the fields, workshop, school, hobby and home applications.


    Delivered with the multimeter:

    ∞User’s manual One piece
    ∞Test leads One piece
    ∞Cable leads One piece
    ∞Cable tracker receiver One piece
    ∞RJ45 remote terminal One piece

    General Maintenance:

    Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
    Dirt or moisture in the terminals can affect readings.
    To clean the terminals:
    Turn the meter off and remove all test leads.
    Shake out any dirt that may be in the terminals.
    Soak a new swab with a cleaning and oiling agent (such as VA-40).
    Work the swab around in each terminal. The oiling agent insulates the terminals from moisture-related contamination.

Send Your Message To Us

Please Choose:
Name * E-mail *
Tel Country Message *