The meter is an auto range 1000 AC&DC Amps clamp meter with bar graph and 3999 counts. For measuring DC and AC voltage, DC and AC current, Resistance, Frequency, Frequency for the clamp, Diode, and Continuity Test with battery operated.
There is the AC measurement to be RMS or TRUE RMS about the meter. It is chosen as user buy.
The auto range 1000 AC&DC Amps clamp meter with bar graph has been designed according to IEC61010 1 and IEC61010 2 032 concerning safety requirements for electrical measuring instruments and handheld current clamps with double insulation over voltage category 1000V CAT II 600V CAT III and pollution 2.
|Frequency from Clamp||40Hz / 400Hz±(0.1%+1)|
|LCD Size||44×23 mm||44×23 mm|
|Max.Jaw Opening||∮42 mm||∮42 mm|
|True RMS Measurement||√|
|Max/Min Value Measurement|
|Auto power off||√||√|
|Low Power Indication||√||√|
|Bar graph||42 segments||42 segments|
|Power||Battery 1.5Vx3 Size AAA|
|Weight||~330g (including battery)|
With Functions of Voltage measurement, Current measurement, Resistance measurement, Diode test,Continuity test, Resistance meansurement, Frequency measurement, this digital clamp meter is ideal for use in the fields, workshop, school, hobby and home applications.
Operator’s instruction manual
Set of test leads
Battery 1.5V3 Size AAA
* Before opening the meter, always disconnect test leads from all sources of electric current.
* If any faults or abnormalities are observed, the meter can not be used any more and it has to be checked out.
* Never use the meter unless the back cover and the battery cover are in place and fastened fully.
* Do not use abrasives or solvents on the meter, use a damp cloth and mild detergent only.